top of page
MS-106  Idle Control Valve

MS-106 Idle Control Valve

8.14.24 Product Update Note:  The latest batch of ICV's may allow a small passage of air when not activated, and while the valve should not pass any air by design, we have tested these valves and they work perfectly.  The idle adjustment with the valve, electrical unplugged, is set to 950rpm and once plugged in the vavle will stabalize the idle. In the rare case you are unable to adjust the idle to 950 with the new valve your throttle body is worn allowing too much air with the slight leak to get idle down too 950.  We are working with the manufacturer to remedy the slight air leak...

 

Proper WBX vanagon T3 idle control vavle  ICV works with both stock 2.1  and MANSISPEED MS-700 EFI Kit.  

Just a quick note on correct idle control valve for the waterboxer, Certain vendors seem to be selling the wrong valve. That’s actually for a T4 Eurovan, yes, it might look similar, but they are completely different and will not work correctly with the stock digifant/digijet injection or MANSISPEED fuel injection. A correctly working T3 Vanagon idle control valve, will only allow a minimal  air to pass under high vaccum when disconnected (resting closed) Take note of the pictures.

    $155.00Price
    bottom of page